Study Note - 10
INTERNATIONAL MONETARY FUND AND
FINANCIAL SYSTEM
10.1 Understanding International Monetary System
This Section includes:
INTRODUCTION :
A sound knowledge of international financial systems is a pre-requisite for the following reasons:
a. Global trade have been on the steady increase
b. Global opportunities have to be exploited
c. It helps in avoiding delays in handling global trade
d. There are a number of financial intermediaries and institutions that facilitate global
trade
e. Technology is a great enabler in fostering international trade and scaling up of
operations
f. Globally, there is a trend towards elimination of all trade barriers and facilitate uninterrupted
global trade
g. Loss due to exchange fluctuations if not prevented or unattended immediately would
erode the fortunes of the company.
Motives for World Trade And Foreign investment
World Trade Bodies
Trade-related Investment Measures (TRIMS)
Trade Related Aspects of Intellectual Property Rights (TRIPS)
Trading Blocs and Types of Economic Cooperation
Balance of Payments
International Organisations and Accounting Standards
Concepts in Foreign Exchange Rate
International Monetary Fund
International Financial Management: Important Issues and Features, International
Capital Market
International Financial Services and Insurance: Important Issues and Features
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
The economic change witnessed by the world like the disintegration of soviet union, political
and economic freedom in eastern Europe, the emergence of market-oriented economies in Asia,
the creation of a single European market, trade liberalization through regional trading blocs,
such as European union, the world’s joint mechanism, such as the world trade organization,
have all impacted and facilitated the growth of international trade.
In 1989, Mexico significantly liberalized its foreign direct investment regulations to allow 100%
foreign ownership. The North American Free Trade Agreement of 1994 extends the areas of
permissible foreign direct investment and protects foreign investors with a dispute settlement
mechanism. This is an example of fostering international trade.
MOTIVES FOR WORLD TRADE AND FOREIGN INVESTMENT
The theories of comparative advantage, factor endowments and product life cycle have been
suggested as three major motives for foreign trade.
Theory of comparative advantage
This is the classical economic theory which explains why countries exchange their goods and
services with each other. The underlying assumption is that some countries can produce some
types of goods more efficiently than other countries. Hence, the theory of comparative advantage
assumes that all countries are better off when each one specializes in the production of
those goods which it can produce more efficiently and buys those goods which other countries
produce more efficiently. It neutralizes the cost and benefits more effectively.
The theory of factor endowments
Countries are endowed differently in their economic resources. Columbia is more efficient in
the production of coffee and the US is more efficient in the production of computers. Colombia
has the oil, weather and abundant supply of unskilled labor necessary to produce coffee more
economically than the US. Differences in these national factor endowments explain differences
in comparative factor costs between the two countries. Each country has to take advantage
of its own strengths and also trade it off against other countries strenghs.
Product life cycle
All products have a certain length of life. During this life they go through certain stages. The
product life cycle theory explains both world trade and foreign investment patterns on the
basis of stages in a product’s life. In the context of international trade, the theory assumes that
certain products go through four stages: Introduction and export, international production,
intense foreign competition and imports.
Trade control
The possibility of a foreign embargo on sales of certain products and the needs of national
defense may cause some countries to seek self sufficiency in some strategic commodities. Political
and military questions constantly affect international trade and other international business
operations. Tariffs, import quotas and other trade barriers are three primary means of
protectionism. This is where a country’s economic reforms and liberalization really support
international trade in a big way.
WORLD TRADE BODIES :
In 1947, 23 countries signed the General Agreement on Tariffs and Trade (GATT) in Geneva.
To join GATT, countries must adhere to Most Favored Nation (MFN) clause, which requires
that if a country grants a tariff reduction to one country, it must grant the same concession to
all other countries. This clause applies to quotas also.
The new organization, known as the World Trade Organization (WTO), has replaced the GATT
since the Uruguay Round accord became effective on January 1, 1995. Today, WTO’s 135 members
account for more than 95% of world trade. The five major functions of WTO are:
a. Administering its trade agreements
b. Being a forum for trade negotiations
c. Monitoring national trade policies
d. Providing technical assistance and training for developing countries
e. Cooperating with other international organizations
Under the WTO, there is a powerful dispute-resolution system, with three-person arbitration
panel. Some of the major features of WTO and GATT are:
a. World Trade Organization (WTO), was formed in 1995, head quartered at Geneva,
Switzerland
b. It has 152 member states
c. It is an international organization designed to supervise and liberalize international
trade
d. It succeeds the General Agreement on Tariffs and Trade
e. It deals with the rules of trade between nations at a global level
f. It is responsible for negotiating and implementing new trade agreements, and is in
charge of policing member countries’ adherence to all the WTO agreements, signed by
the bulk of the world’s trading nations and ratified in their parliaments.
g. Most of the WTO’s current work comes from the 1986-94 negotiations called the Uruguay
Round, and earlier negotiations under the GATT. The organization is currently
the host to new negotiations, under the Doha Development Agenda (DDA) launched
in 2001.
h. Governed by a Ministerial Conference, which meets every two years; a General Council,
which implements the conference’s policy decisions and is responsible for day-today
administration; and a director-general, who is appointed by the Ministerial Conference.
The General Agreement on Tariffs and Trade (GATT)
a. GATT was a treaty, not an organization.
b. Main objective of GATT was the reduction of barriers to international trade through
the reduction of tariff barriers, quantitative restrictions and subsidies on trade through
a series of agreements.
714
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
c. It is the outcome of the failure of negotiating governments to create the International
Trade Organization (ITO).
d. The Bretton Woods Conference had introduced the idea for an organization to regulate
trade as part of a larger plan for economic recovery after World War II. As governments
negotiated the ITO, 15 negotiating states began parallel negotiations for the
GATT as a way to attain early tariff reductions. Once the ITO failed in 1950, only the
GATT agreement was left.
e. The functions of the GATT were taken over by the World Trade Organization which
was established during the final round of negotiations in early 1990s.
TRADE-RELATED INVESTMENT MEASURES (TRIMS) :
a. TRIMs are the rules a country applies to the domestic regulations to promote foreign
investment, often as part of an industrial policy.
b. It is one of the four principal legal agreements of the WTO trade treaty.
c. It enables international firms to operate more easily within foreign markets.
d. In the late 1980’s, there was a significant increase in foreign direct investment throughout
the world. However, some of the countries receiving foreign investment imposed
numerous restrictions on that investment designed to protect and foster domestic industries,
and to prevent the outflow of foreign exchange reserves.
e. Examples of these restrictions include local content requirements (which require that
locally-produced goods be purchased or used), manufacturing requirements (which
require the domestic manufacturing of certain components), trade balancing requirements,
domestic sales requirements, technology transfer requirements, export performance
requirements (which require the export of a specified percentage of production
volume), local equity restrictions, foreign exchange restrictions, remittance restrictions,
licensing requirements, and employment restrictions. These measures can also be used
in connection with fiscal incentives. Some of these investment measures distort trade
in violation of GATT Article III and XI, and are therefore prohibited.
TRADE RELATED ASPECTS OF INTELLECTUAL PROPERTY RIGHTS (TRIPS) :
a. TRIPS is an international agreement administered for the first time by the World
Trade Organization (WTO) into the international trading system.
b. It sets down minimum standards for many forms of intellectual property (IP) regulation.
c. Till date, it remains the most comprehensive international agreement on intellectual
property.
d. It was negotiated at the end of the Uruguay Round of the General Agreement on
Tariffs and Trade (GATT) in 1994.
e. TRIPS contains requirements that nations’ laws must meet for: copyright rights,
including the rights of performers, producers of sound recordings and broadcast
715
ing organizations; geographical indications, including appellations of origin; industrial
designs; integrated circuit layout-designs; patents; monopolies for the developers
of new plant varieties; trademarks; trade dress; and undisclosed or confidential
information. TRIPS also specify enforcement procedures, remedies, and dispute
resolution procedures.
f. In 2001, developing countries were concerned that developed countries were insisting
on an overly-narrow reading of TRIPS, initiated a round of talks that resulted in
the Doha Declaration: a WTO statement that clarifies the scope of TRIPS; stating for
example that TRIPS can and should be interpreted in light of the goal “to promote
access to medicines for all”.
TRADING BLOCS; TYPES OF ECONOMIC COOPERATION :
A trading bloc is preferential economic arrangement between a group of countries that reduces
intra-regional barriers to trade in goods, services, investment and capital. There are more
than 50 such arrangements at the present time. There are five major forms of economic cooperation
among countries: Free trade areas, customs unions, common markets, economic unions
and political unions.
The North American Free Trade Agreement (NAFTA) among US, Canada and Mexico is an
example of Free trade areas where member countries remove all trade barriers among themselves.
Under the customs union arrangement, member nations not only abolish internal tariffs among
themselves but also establish common external tariffs.
In a common market type of agreement, member countries abolish internal tariffs among themselves
and levy common external tariffs. The also allow the free flow of all factors of production,
such as capital, labor and technology.
The economic union combines common market characteristics with harmonization of economic
policy. Member nations are required to pursue common monetary and fiscal policies.
Political union combines economic union characteristics with political harmony among the
member countries.
Motives for foreign investment
The product life cycle theory, the portfolio theory and the oligopoly model have been suggested
as bases for explaining and justifying foreign investment.
Product life cycle theory explains changes in the location of production. After successful launch
of new products, companies shift the manufacturing base to other countries for lowering costs
and retain the margin. This is what is witnessed in India today, which has become the destination
for low cost outsourcing. For eg. South India is called Detroit of US due to many MNC
automobile companies setting up their production facilities there.
Portfolio theory indicates that a company is often able to improve its risk-return performance
by holding a diversified portfolio of assets. This theory represents another rationale for foreign
investment. The diversified portfolio will include foreign assets.
716
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
Under the oligopoly model, the assumption is that business firms attract foreign investments
to exploit their quasi monopoly advantages. The advantage of an MNC over a local company
may include technology, access to capital, differentiated products built on advertising, superior
management and organizational scale.
BALANCE OF PAYMENTS :
A country’s balance of payments is defined as the record of transactions between its residents
and foreign residents over a specified period, which includes exports and imports of goods
and services, cash receipts and payments, gifts, loans, and investments. Residents may include
business firms, individuals and government agencies. The balance of payments helps business
managers and government officials to analyze a country’s competitive position and to forecast
the direction of pressure on exchange rates. Government’s export import policies also mainly
depend on this.
The balance of payments is a sources-and-uses-of-funds statement reflecting changes in assets,
liabilities and net worth during a specified period. Transactions between domestic and foreign
residents are entered in the balance of payments as either debits or credits. Transactions that
earn foreign exchange are often called credit transactions and represent sources of funds. Transactions
that expend foreign exchange are called debit transactions and represent use of funds.
A country incurs a ‘surplus’ in its balance of payments if credit transactions exceed debit transactions
or if it earns more abroad than it spends. On the other hand, a country incurs a deficit’
in its balance of payments if debit transactions are greater than credit transactions or if it spends
more abroad than it earns. Surpluses and deficits in the balance of payments are of considerable
interest to banks, companies, portfolio managers and governments.
They are used to:
a. Predict pressure on foreign exchange rates
b. Anticipate government policy actions
c. Assess a country’s credit and political risk
d. Evaluate country’s economic health
Balance of payments accounts
The international monetary fund (IMF) classifies balance of payments transactions into five
major groups:
a. Current account: merchandise, services, income and current transfers
b. Capital account: Capital transfers, non-produced assets, non financial assets
c. Financial account: Direct investments, portfolio investments and other investments
d. Net errors and omissions
e. Reserves and related items: These are government owned assets which include monetary
gold, convertible foreign currencies, deposits, and securities. The principle
convertible currencies are the US dollar, the British pound, the euro, and the Japanese
Yen for most countries. Credit and loans from the IMF are usually denominated
in special drawing rights (SDRs). Sometimes called ‘paper gold’ SDRs can be
used as means of international payment.
717
INTERNATIONAL ORGANISATIONS AND ACCOUNTING STANDARDS :
Many accounting professionals perceive standardization to be too strict and inflexible to
provide the information users need;
Harmonisation is necessary as so many MNCs are doing business in numerous countries;
Several international organizations dealing with the harmonization challenge:
IASC: Founded in 1973 by agreement among professional accounting organizations in
9 countries; now grown to over 70 countries; over 100 professional accounting organizations;
IASC develops and publishes IASs. IASC also promotes these standards for wide international
acceptance;
Some countries use IASs as their national accounting rules and others use them as basis for
their own accounting rules; MNCs voluntarily use IASs for secondary set of financial statements;
European Union (EU): Founded on 25/3/57, is the Association of European States,
when Belgium, France, West Germany, Italy, Luxembourg and Netherlands signed the
Treaty of Rome. Treaty was free movement of labour, capital and goods among member
countries by 1992, without any tariff or barrier.
Now EU imports and exports more than any single country in the world; with US as major
trading partner; there are 15 member countries now;
4th Directive:
7th Directive:
8th Directive:
Mutual Recognition Directive:
Directive of Dec 8, 1986
11th Directive of Feb 13, 1989
EU Cooperation with IASC:
It is a major step in the direction of international harmonisation;
It is to facilitate multinational companies to prepare one set of financial statements
that would be accepted by stock exchanges worldwide.
Organisaton for economic cooperation and development (OECD):
Established on Dec 14, 1960; formed by 24 most powerful countries; HO at Paris;
It is an international organization for economic research and policy analysis;
It provides reports on financial accounting and reporting and economic development.
In countries such as India, Canada and Australia, Foreign Investments need government approval.
In US and Switzerland, even domestic investments need government approval.
718
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
OECD guidelines provide for “Disclosure of information” in financial statements. There exists
open and cooperative relationship among the various organizations seeking to set international
accounting standards such as IASC and EU commission.
International organisation of securities commissions (IOSCO)
It is a private organization with the objective of integrating the securities markets worldwide
and for developing financial reporting standards and their effects on securities markets.
United Nations (UN)
UN studies the impact of multinational corporations on development and international relations
and brings out publications on international accounting and reporting issues.
International federation of accountants (IFAC)
IFAC established in 1977 if for development of accounting profession and works to achieve
international technical, ethics and education pronouncements for the profession.
Other organizations are:
Asia-Pacific Economic Cooperation
Nordic Federatin of Accountants
Association of Southeast Asian Nations
International monetary system
The international monetary system consists of laws, rules, institutions, instruments and procedures
which involve international transfer of money. These elements affect foreign exchange
rates, international trade and capital flows and balance of payment adjustments. Foreign exchange
rates determine prices of goods and services across national boundaries. These exchange
rates also affect international loans and foreign investment. Hence, the international
monetary system plays a critical role in the financial management of multinational business
and economic policies of individual countries.
Foreign exchange system
a. A global company’s access to international capital markets and its freedom to move
funds across national boundaries are subject to a variety of national constraints.
b. These constraints are frequently imposed to meet international monetary agreements
on determining exchange rates.
c. Constraints may also be imposed to correct the balance of payments deficit or to promote
national economic goals.
d. A foreign exchange rate is the price of one currency expressed in terms of another
currency. A fixed exchange rate is an exchange rate which does not fluctuate or which
changes within a predetermined band. The rate at which the currency is fixed or pegged
is called ‘par value’. A floating or flexible exchange rate fluctuates according to market
forces.
719
Advantages of flexible exchange rate system
a. Countries can maintain independent monetary and fiscal policies
b. Permits smooth adjustment to external shocks
c. Central banks need not maintain large international reserves to defend a fixed exchange
rate
Disadvantages of flexible exchange rate system
a. Unstable exchange rates can prevent free flow of trade
b. Inherently inflationary because they remove external discipline
CONCEPTS IN FOREIGN EXCHANGE RATE :
a. An appreciation is a rise in the value of a currency against other currencies under a
floating rate system.
b. A depreciation is a decrease in the value of a currency against other currencies under
a floating rate system.
c. A revaluation is an official increase in the value of a currency by the government of
that currency under a fixed rate system.
d. A devaluation is an official reduction in the par value of a currency by the government
of that currency under a fixed rate system.
Currency boards
A currency board is a monetary institution that only issues currency to the extent it is fully
backed by foreign reserves. Its major attributes are:
a. An exchange rate that is fixed not just by policy but by law
b. A reserve requirement to the extent that a country’s reserves are equal to 100 percent of
its notes and coins in circulation
c. A self correcting balance of payments mechanism where a payment deficit automatically
contracts the money supply and thus the amount of spending as well
d. No central bank under a currency board system
e. In addition to promoting price stability, a currency board also compels the government
to follow a responsible fiscal policy.
f. Countries like Mauritius, Hong Kong, Estonia, Argentina, Lithuania, Bulgaria and Bosnia
are countries that have adopted currency board system.
History of the international monetary system
The pre-1914 gold standard: a fixed exchange system:
In the pre-1914 era, most of the major trading nations accepted and participated in an international
monetary system called the gold standard. Under this regime, countries use gold as a
medium of exchange and a store of value. The gold standard had a stable exchange rate.
720
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
Monetary disorder: 1914-45: a flexible exchange system:
The gold standard collapsed after the First World War and ended the stability of exchange
rates for the major currencies of the world. The value of currencies fluctuated very widely. The
great depression of 1929-32 and the international financial crisis of 1931, further prevented the
restoration of gold standard. Governments started devaluing their currencies to support exports.
Fixed exchange rates: 1945-73:
a. The Bretton woods agreement was signed by representatives of 44 countries in 1944
to establish a system of fixed exchange rates.
b. Under this system, each currency was fixed by government action within a narrow
range of values relative to gold or some currency of reference. US dollar was used
frequently as a reference currency to establish the relative prices of all other currencies
c. At this conference, they agreed to establish a new monetary order, which centered on
IMF and IBRD (World Bank).
d. IMF provides short term balance of payment adjustment loans, while the world bank
makes long term development and reconstruction loans.
e. The agreement emphasized the stability of exchange rates by adopting the concept of
fixed but adjustable rates.
Breakdown of the Bretton woods system:
a. The late 1940s marked the beginning of large deficits in the US balance of payments.
America’s payments deficits resulted in dilution of US gold and other reserves during
the 1960s and early 1970s.
b. In 1971, most major currencies were permitted to fluctuate. US dollars fell in value
against a number of major currencies. Several countries caused major concern by imposing
some trade and exchange controls which was feared that such protective measures
might become widespread to curtain international commerce.
c. In order to solve these problems, the world’s leading trading countries, called the ‘Group
of Ten’, produced the Smithsonian Agreement in 1971.
The post 1973 dirty floating system:
The exchange rate became much more volatile during this period due to a number of events
affecting the international monetary order. Oil crisis of 1973, loss of confidence in US dollar
between 1977 and 1978, second oil crisis in 1978, formation of European monetary system in
1979, end of Marxist revolution in 1990 and Asian financial crisis in 1997.
THE INTERNATIONAL MONETARY FUND (IMF) :
a. An international organization created in 1944 with a goal to foster global monetary
cooperation, secure financial stability, facilitate international trade, promote high employment
and sustainable economic growth, and reduce poverty.
b. Oversees the global financial system by following the macroeconomic policies of its
721
member countries, in particular those with an impact on exchange rates and the balance
of payments.
c. Offers financial and technical assistance to its members, making it an international lender
of last resort. Countries contributed to a pool which could be borrowed from, on a
temporary basis, by countries with payment imbalances.
d. It is headquartered in Washington, D.C., USA.
e. The IMF has 185 member countries
Current actions:
a. The International Monetary Fund’s executive board approved a broad financial overhaul
plan that could lead to the eventual sale of a little over 400 tons of its substantial
gold supplies.
b. The board of IMF has proposed a new framework for the fund, designed to close a
projected $400 million budget deficit over the next few years.
c. The budget proposal includes sharp spending cuts of $100 million until 2011.
Membership qualifications:
a. Any country may apply for membership to the IMF. The application will be considered
first by the IMF’s Executive Board.
b. After its consideration, the Executive Board will submit a report to the Board of Governors
of the IMF with recommendations (the amount of quota in the IMF, the form of
payment of the subscription, and other customary terms and conditions of membership)
in the form of a “Membership Resolution”.
c. After the Board of Governors has adopted the “Membership Resolution,” the applicant
state needs to take the legal steps required under its own law to enable it to sign the
IMF’s Articles of Agreement and to fulfill the obligations of IMF membership.
d. Similarly, any member country can withdraw from the Fund, although that is rare (Ecuador,
Venezuela)
e. A member’s quota in the IMF determines the amount of its subscription, its voting
weight, its access to IMF financing, and its allocation of Special Drawing Rights (SDRs).
f. A member state cannot unilaterally increase its quota - increases must be approved by
the Executive Board and are linked to formulas that include many variables such as the
size of a country in the world economy.
g. IMF established rules and procedures to keep participating countries from going too
deeply into balance of payments deficits. Those countries with short term payment
difficulties could draw upon their reserves, defined in relation to each member’s quota.
THE EUROPEAN MONETARY UNION
A monetary union is a formal arrangement in which two or more independent countries agree
to fix their exchange rates or employ only one currency to carry out all transactions. Full
European monetary union was achieved in 2002, which enabled 15 EU countries to carry out
transactions with one currency through one central bank under one monetary policy. A single
currency called the EURO was adopted.
722
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
10.2 Export – Import Procedures and Documentation
This Section includes:
INTRODUCTION :
The starting point of an international commercial transaction is an enquiry from a party abroad
about the terms of sale of any commodity. The exporter then sends his quotations for various
types and qualities of his products either in rupees/dollars or other currencies along with
samples, if necessary. These quotations may be on cost ex works basis or cost plus freight
(C&F) or cost, insurance plus freight (c.i.f) then a sale contract is entered into. This can be a
formal legal contract or informal written agreement or even an exchange of correspondence
evidencing the intention to buy and sell. A sale contract incorporates the terms and conditions,
quality and quantity of the goods, packing and specifications, the place and mode of
delivery, the period of delivery, payment terms, prices accepted etc. Normally, the exporter
has to add to his ex-works price the cost of :
(a) Transportation from his factory to the port;
(b) Port Commissioner’s charges;
(c) Shipping, freight and other forwarding agents fees, handling charges etc;
(d) Insurance from warehouse etc.
FOREIGN TRADE TERMS :
Exporters and importers would first get to know of foreign offers to buy or sell from the Indian
Trade Missions abroad, Indian Embassies, Trade Development Authority in India, various
Chambers of Commerce, Government bodies such as the Export Promotion Councils, Commodity
Boards, Development Councils, etc. The global or regional tenders and trade enquiries
are published in the Financial News Bulletins, daily papers, Weekly or Monthly Bulletins of
the Ministry of Commerce, DGCI&S, Chambers of Commerce or TDA, etc. Sometimes, the
exporters get in touch with importers through their own agencies, correspondents and branches
abroad. They may also get to know of the enquiries from the Trade Missions or Trade Consuls
to various countries in India and Joint Chambers like Indo-American Chamber, etc. Exporters
and importers would keep in touch with these agencies and their publications, bulletins etc.
Lastly, often, participation in foreign exhibitions, trade fairs, visits abroad and business contract
abroad also help secure foreign contracts.
Sale Terms
Sale terms should be clearly stated whether ex-works, f.o.b., c.f. or c.i.f. In international trade,
disputes can be avoided by clearly specifying the rights and obligations of both parties to the
contract viz., seller and buyer. The International Chamber of Commerce provides guidelines
regarding these rights ad obligations, some of which are referred to in the Appendix.
Foreign Trade Terms
Letters of Credit
Types of Credit
Documentation of Foreign Trade
723
In an ex-works quotation, ownership of goods is transferred at the Octroi itself from the seller
to buyer. The buyer or his agent arranges for transportation to the port, its loading, shipping,
insurance, clearance etc. The examples are the purchase of jute goods, tea, etc., in Calcutta by
the agents of the USSR, Syria and Iran.
In an f.o.b. quotation (free on board) or f.a.s (free along side) the seller delivers the goods on
board the ship named by the buyer while the subsequent responsibility lies with the buyer or
his agents. In a.c.f quotation, the seller is responsible for transport to the ship, loading and
shipping etc., while the insurance is borne by the buyer. In the c.i.f, quotation, even the insurance
is borne by the seller and he includes in the price quoted, the cost of goods, packing
handling, loading, transport shipping and insurance, c.i.f & c quotation includes cost, insurance,
freight and commissions.
The terms of sales depend on the custom of trade, nature of the product sold, profit margins in
the trade, legal and government controls in the respective countries, organization of the firm
and the circumstances of the buyer and seller.
Payment Terms
The terms relating to payment should also be clearly stated in the sales contract itself. If payment
is arranged within a period of six months, this is called short-term payment and the
exchange control rules in India necessitate in general, all receipts to be secured within six
months of the date of shipment. This was relaxed after effecting free convertibility of rupee on
trade account in March 1993. Payment terms depend upon the commodity sold, position of
the buyer and seller, trade practices and availability of bank credit. Some of the important
terms of payment leaving aside the letters of credit involving bank credit which will be discussed
later are cash with order, consignment sales and open account.
1. Cash with order
Cash with order or advance payment is the best term possible which is accepted by the buyers
only in extraordinary circumstances when the goods are to be the buyer’s specifications and
no other buyer may be willing to take them. Exchange Control regulations now permit advance
payment in certain cases.
2. Consignment sales:
Goods like tea, coffee, wool etc., which cannot be standardized and where the produce should
be available in the foreign market physically to be sold are sent on a consignment basis. The
consignment is to an agent or representative abroad whose integrity and credit worthiness are
known to the exporter. Sometimes, the consignee executes a bank guarantee to the effect that
as and when goods are sold, the sale proceeds will be duly remitted. In this case, banks enter
into the transaction either as remitting agency for importers or collecting agency for exporters.
3. Open Account:
Goods are sold on open account when there will be no drawing of bills or other documents to
negotiate by banks. “On payment” is made at periodical intervals by DDs, TTs, etc. as and
when the sales are made. Such terms are limited only to subsidiaries, associate firms or closely
connected firms such as foreign collaborators.
724
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
Buyers’ Credit
If credit is granted to the buyer by a financial institution in the seller country or a financial
institution in the buyer country, then it is called buyer’s credit. The buyer enters into an agreement
with the financial institutions to pay the supplier on cash basis or document basis and
credit granted to the buyers for the purpose. The financial agreement between the buyers and
the financial institution lays down the conditions to be fulfilled by the supplier before payment
is made to him such as the form, values and maturity of promissory notes, the form in
which the supplier must present the claims and bills to the financing bank, interest rate applicable,
credit repayment terms, taxes, commission and other charges to be paid by the borrower,
and the procedure to be followed in the case of defaults. Such credits are generally
granted by the supplier country’s financial institution like EXIM Bank for periods ranging
from 5 to 10 years. The supplier in such cases gets the government and the central bank’s
clearance and for arranging this type of credit.
Lines of Credit
A line of credit is granted by a foreign government or an international institution in the buyer
country so that a larger number of buyers could benefit from it. This generally is available for
a programme such as Railways, Roads, Electricity, Water Supply etc., and the responsibility
for assessing the creditworthiness of the buyers or of the project is passed on to the buyer
country’s financial institution. Such credit lines are granted to ICICI in India by the German
banks and UK banks for purchase of capital goods and machinery in respect of plastics, drugs
etc. and by the IDBI to Bangladesh, Malaysia, Mauritius etc.
LETTERS OF CREDIT – DOCUMENTARY AND NON-DOCUMENTARY
Letter of credit is the most important mode of payment for trade throughout the world. As the
buyers and sellers are often not known to each other and the bankers are well known for their
credit standing, the banks creditworthiness is substituted for the creditworthiness of the buyer
under this method. The documentary L/C is an undertaking given by the bank to pay or
accept the bill provided the beneficiary (exporter) fulfils the terms and conditions of sale as set
out in the application made to the bank by the importer (buyer). Generally, banks follow in
India uniform customs and practice code in the issue of the documentary credits which will be
binding as between banks and between banks and customers. The documentary credit protects
the seller from the risk of loss of funds due to the uncertain credit position of the buyer
and promotes foreign trade and foreign investment. The bank charges from the buyer-importer
at the interest rate admissible for the credit so granted and may or may not ask for a
margin deposit of funds for the purpose. The banks also charge for the handling of documents
in the process of negotiation or collection. In the case of non-documentary credits, no documents
need accompany the Bill of Exchange in which case the exporter bank only arranges to
collect the amounts involved and no handling charges may be levied.
TYPES OF CREDIT :
Documentation in respect of credit will depend upon the type of credit available from banks.
a) Revocable or Irrevocable:
While revocable credit can be cancelled at any time without the concurrence of the beneficiary,
the irrevocable credit cannot be so revoked.
725
The revocable letter of credit, according to the International Chamber of Commerce, is “not a
legally binding undertaking between the bank or banks concerned and the beneficiary”. Irrevocable
letter of credit is a definite undertaking on the part of the issuing banks and constitutes
an obligation to the beneficiary to honour bills or drafts under the credit, provided the terms
and conditions of the credit are complied with. Even the revocable credit is good until it is
cancelled and the cancellation is notified to the beneficiary and/or his bank and proves the
bonafides and the intention of importing by the buyers.
b) Confirmed and unconfirmed Credits:
A documentary L/C which is irrevocable can be confirmed or unconfirmed. The confirmation
of the importer bank is communicated through its correspondent or agent or branch in the
exporter’s country. If it is an irrevocable credit, the latter bank – correspondent, agent or branch
– confirms the credit to the beneficiary. The confirmation adds further strength to the exporter
in his own country by his own banker. If the local bank advises the credit without confirming,
it is called “unconfirmed credit”. While the confirming bank has an obligation to negotiate
bills under this credit drawn by the beneficiary, the advising or notifying bank has no such
obligation.
c) Transferable Credit:
It is one which contains an express provision that the benefits under it to be enjoyed by the
beneficiary can be transferred from the latter to a third party who supplies him raw materials
for this manufacture or supplies manufactured outputs if he is a merchant trader.
d) Back-to-back Credits:
There are the secondary credits opened by a bank on behalf of the beneficiary of an original
credit in favour of the domestic supplier. This is a formal opening of another credit line on the
basis of credit to the beneficiary. Suppose a London importer of tea opens a confirmed irrevocable
Letter of Credit through the Barclays Bank in London to the Bank of India in Calcutta. As
the tea merchant has to buy tea from a tea producer, the formed may arrange with the Bank of
India to issue a confirmed letter in favour of the tea producer for his use in the manufacturing
process. This is known as “back-to-back credit”.
e) Red Clause or Green Clause:
This is incorporated only in irrevocable credits and authorizes the negotiating bank to make
advances to the beneficiary to enable him to manufacture or purchase the goods from the local
suppliers. When relations between the exporter and importer are close or they are connected
as collaboration or suppliers of long standing, then the red clause is incorporated in the L/C at
the request of the importer buyer for the benefit of the exporter. Such clauses are used in
packing credit arrangements in wool exports, tea exports, etc.
f) Revolving Credit:
These credits are granted on a revolving basis to suit the requirements of suppliers who are
doing this business on a continuing basis. This credit obviates the need for opening fresh
letters for each shipment. As soon as the negotiated drafts under the credit are reimbursed by
the importer to the bank opening the credit, fresh credit is available to the foreign negotiation
bank.
726
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
It will thus be seen from the above discussion that the parties to the L/C, besides the buyer,
beneficiary and the issuing bank are the notifying bank which advises the credit to the exporter
in his country, confirming bank which confirms the credit to the exporter in his country,
the negotiating bank which negotiates the drafts, bills of exchange etc., and the paying bank
which finally pays to the exporter. If the notifying bank also confirms the credit and negotiates
the bills, then all the three parties are merged into one bank. The paying bank may be the
original issuing bank in the buyer’s country in which case, the bill is drawn in the foreign
currency (from the point of view of exporter) or by the notifying or confirming bank in which
case the bill is drawn and paid in the local currency of the exporter.
DOCUMENTATION OF FOREIGN TRADE :
The documents used in foreign trade are broadly of two categories, namely substantive documents
and auxiliary documents. In the first category are included: (1) Bill of Lading (2) Marine
Insurance and (3) Bill of Exchange. The auxiliary instruments are commercial invoices, consular
invoice, custom invoice, certificate of origin, inspection certificate, packing list, etc.
1. Bill of Lading
The Bill of Lading is an important document issued by a common carrier, namely, the shipping
company or Airways, stating that the goods mentioned therein have been received for shipment
or airlift and that it has undertaken to deliver the goods at a named destination on payment
of freight or for which freight has already been paid (c.i.f. or c.f.). The Bill of Lading is a
document of title to goods, transferable by endorsement and is a receipt from the shipping
company regarding the number of packages with a particular weight and markings and a
contract for the transportation of the same to a part of destination mentioned therein. The
shipping company is governed by the carriage of goods by the Sea Act which provides protection
to shippers and obligations on the shipping companies.
A Bill of Lading stating “Received for Shipment” is not adequate if the sales terms are “on
board”. The bill should specify that goods have been “on board” or “shipped” to satisfy the
terms of c.i., or c.i.f.
Bills of Lading are the following types
(a) Freight paid or freight payable. In the case of c.i.f. or c.f., the freight should be paid
by the shipper and in case o f.o.b., it may be payable by the consignee or importer or
his agent. The bill of lading “Freight collect” is, therefore, not proper tender for
c.i.f. terms of sale;
(b) Clean or clauused bill. In the case of any adverse remarks such as “damaged bags”
or “bill torn” or “Drums dirty or old”, such bill are called “claused” or dirty bills as
against clean bills which do not mention anything adverse on the condition of packages,
(c) Stale bill of lading. If the bills are kept for too long with the shipper and by that
time goods might have reached the destination port, the importer has to pay demurrages
for non-acceptance of the goods which is due to delay in the receipt of
shipping documents. Such delayed bills of lading are called “Stale Bills”.
Mates’s Receipt
When goods are delivered to the agent of a shipping company for shipment by a specified
vessel and he agrees to do so, then a Mate’s Receipt is given to the shipper. This is exchanged
for a regular Bill of Lading from the Master of the ship or the shipping company. Mate’s
Receipt is, however, not an acceptable document to the Bank from the point of its negotiation.
For such terms as “on board” or shipped or c.i.f. or c.f., this is not adequate delivery.
727
Through or Transhipment Bills
If the transportation involves more than one mode, namely ship, rail, road etc., then a “Through
Bill” is issued. Such bills are not accepted by some bankers as they are not certain about the
state in which goods will reach the consignee after all the transshipments. If the sale terms are
specific about “on board” or “shipped” only such terms are to be used and transshipment bills
are avoided. There has been more recently cases of exports using more than one means of
transport, in India which gave rise to combined transport documents. In the case of inland
container depots in Bangalore, Delhi, Guntur and Coimbatore, for example, export cargo may
be loaded direct at these dry ports involving transport by land/air/sea leading to the use of
combined transport documents. India was making efforts to get these documents officially
recognized by the International Chamber of Commerce and U.N. bodies.
Charter Party Bill
When goods are in bulk, a shipper or a group of shippers charter a complete vessel for transport
of those goods. Such bills arising out of Charger Vessels are called “Charter Party Bills”.
If a charter agreement is not known to a third party who has booked on this vessel, the Bills of
Lading arising out of this are not so attractive to bankers as they do not know their route and
destination and the time periods involved.
Negotiability of Bill of Lading
All Bills of Lading are negotiable if the terms used are “consignee or is order” or the “party or
his order”. The Bills are issued in triplicate – all in original and signed by the Master of the
ship. When any one is used for taking delivery of goods, the others become invalid.
Airway Bills
Airway Bills is specifically designed for quick transport; it is a document of title to goods but
not negotiable. They are generally made out in the name of the consignee who takes delivery
and makes payment. Three parts of the Airways Bill are issued – the first part marked for
“Carrier”, second for the “consignee” and the third for the ”consignor”. While the first is
singed by the “consignor” and the second is signed by both the consignor and the carrier, the
third is signed by the carrier or his agent.
2. Marine Insurance Policy
As the banks are lending against goods in transport, they wish to avoid risks of loss and invariably
insist on insurance. Marine insurance is done through a policy of insurance taken at a
stated premium and is a quasi-negotiable instrument. This policy indemnifies the party-shipper
against the normal marine losses or perils of the sea, such as damages to the vessel, or
cargo by accidents or casualties, fire, jettison, natural calamities, etc. Marine insurance policy
generally has a legal standing and not a certificate of insurance. The bank has to scrutinize
whether there are any added clauses on the policy, the amount covered, voyages and goods
covered and the risks covered and the extent of the coverage. The ‘Institute Clauses’ are the
standard policy clauses which are included and attached and amplified in the policy to avoid
misunderstanding. Such clauses are accepted by the Institute of London Underwriters.
Types of Losses
a. Total loss
b. General average loss borne proportionately by all interests at risk.
c. Partial loss on particular average loss but not of a general type if the ship is sunk,
burnt or stranded
728
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
d. Losses attributed to fire, explosion, collision etc.
e. Discharge at a port of distress.
f. Special charges for landing, warehousing, forwarding etc.
(FPA) Free of Particular Average Policy
This policy covers losses or damages falling under a particular average clause. This is a minimum
liability insurance and gives only partial cover for losses.
Particular Average (WPA) Clauses
This widens the range of partial losses covered above at a slightly higher premium. WPA
clauses generally cover all marine losses plus General Average loses plus particular average
losses if the loss is above a specified value of shipped goods and up to a percentage value of
goods. This gives fuller protection than the FPA clauses.
All Risks Clause
This gives 100 per cent protection in respect of risks covered but not cover risks due to war,
strikes, riots, inherent vice or damage in the goods, etc. Sometimes, arrangements are made
for more than 100 per cent coverage of risks at a extra premium. As none of the above policies
covers war risks, strikes, riots, if any, the party desiring to have them, has to have additional
cover for them.
Warehouse to Warehouse Cover
This is a comprehensive cover called transit clause covering protection from the commencement
of transit to the final destination.
Action for Claiming Indemnity
The concerned bank holding the policy should give prompt notice to insurers, carriers and all
parties concerned in the event of damage or loss. A survey of the loss should be got done to
assess the extent and the degree of damage and send a claim to insurers accordingly in time.
The documents required to be submitted for claim either for partial loss or full loss coverage
are the insurance policy, packing list, weight list, bills of lading, invoice, Master’s Protest certifying
any unusual happening on the voyage, survey report on the nature and extent of damage.
etc.
Types of Insurance Documents
There are various types of insurance policies such as floating policy, open cover policy, specific
policy, etc. Of these, specific policy is most acceptable, from the point of view of the banker.
(a) Floating Policy
A floating policy is a contract of insurance to cover a number of shipments the maximum value
of which is given but the details of which such as the name of the vessel, destination, weight
and specification of cargo, etc., are not declared. These details are expected to be filled in or
endorsed on it later. This is not, however, valid from the point of view of the banker unless the
sale terms include the tender of such an insurance certificate.
729
10.3 International Financial Management: Important Issues
and Features, International Capital Market
This Section includes:
INTRODUCTION :
International financial markets are a major source of funds for international transactions. Most
countries have recently internationalized their financial markets to attract foreign business.
Internationalization involves both a harmonization of rules and a reduction of barriers that
will allow for the free flow of capital and permit all firms to compete in all markets.
THE FOREIGN EXCHANGE MARKET :
The foreign exchange market is the market in which currencies of various countries are bought
and sold against each other. The foreign exchange market is an over-the-counter market. Geographically,
the foreign exchange markets span all time zones from New Zealand to the West
Coast of the United States of America.
The retail market for foreign exchange deals with transactions involving travelers and tourists
exchanging one currency for another in the form of currency notes or travelers cheques. The
wholesale market often referred to as the interbank market is entirely different and the participants
in this market are commercial banks, corporations and central banks.
Participants:
Commercial Banks are commonly known as the “market makers” in this market. In
other words, on demand, they will quote buying and selling rates for one currency
against another and express willingness to take either side of the transaction. They also
buy and sell on their own account and carry inventories of currencies.
Foreign exchange brokers are essentially middlemen providing information to market
making banks about prices and a counter party to transactions. Brokers do not buy or
sell on their own account, instead that they have helped strike between two market
making banks.
FOREIGN EXCHANGE MARKET
Eurocurrency market
Euro Credit market
International commodity market
Asian Currency Market
International Banking
Financing Foreign Trade
730
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
Central banks also intervene in the markets from time to time in order to move the
market in a particular direction.
Corporations use the foreign exchange markets for many purposes. On the operational
front, they use the foreign exchange markets for payments towards imports, conversion
of export receipts, hedging receivables and payables position and payment of interest
on foreign currency loans which they have taken. Companies that are cash rich
tend to also park surplus funds and take active positions in the foreign exchange market
to earn profits from exchange rate movements. There are others who, as a matter of
company policy, restrict their participation to producing and selling of goods and services
and only hedge their exposures.
Identification of foreign exchange exposures
Foreign exchange exposures arise from many different activities. A traveler going to visit
another country has the risk that if that country’s currency appreciates against their own the
trip will be more expensive.
An importer who buys goods priced in foreign currency has the risk that the foreign currency
will appreciate thereby making the local currency cost greater than expected.
An exporter who sells his product in foreign currency has the risk that if the value of that
foreign currency falls then the revenues in the exporter’s home currency will be lower.
Fund Managers and companies who own foreign assets are exposed to fall in the currencies of
the countries where they own the assets. This is because if they were to sell those assets there
and repatriate the money, the exchange rate would have a negative effect on the home currency
value. Further, physical movement of assets from a country is more complex.
Markets that allow exchange of currencies and flow of capital across countries facilitate international
business. These markets are known as international financial markets, which may
take any of the following form:
FOREIGN EXCHANGE MARKET
Eurocurrency market
Euro Credit market
International commodity market
Asian Currency Market
International Banking
Financing Foreign Trade
THE FOREIGN EXCHANGE MARKET :
A market where currencies are exchanged in order to buy products or invest in securities denominated
in a foreign currency. The Euro Currency Market Eurocurrency market is com
731
posed of several large banks (sometimes referred to as Euro Banks) that accept deposits and
provide loans in various currencies.
Eurocurrency Markets :
Eurocurrency market consists of banks that accept deposits and make loans in foreign currencies
outside the country of issue. These deposits are commonly known as Eurocurrencies. Thus,
US dollars deposited in London are called Eurodollars; British pounds deposited in New York
are called Eurosterling, etc.
Eurocurrency markets are very large, well organized and efficient. They serve a number of
valuable purposes for multinational business operations. Eurocurrencies are a convenient money
market device for MNCs to hold their excess liquidity. They are a major source of short term
loans to finance corporate working capital needs and foreign trade.
Euro Credit market:
Euro credit or Euro Loans are the loans extended for one year or longer. The market that deals
in such loans is called Euro Credit Market.
Euro bond market:
This market caters to the long term financial needs of the international players.
International commodity market:
It is a market where major primary commodities are traded including price forecasts, regional
price indices, transportation costs etc.
Asian Currency Market
In 1968, an Asian version of the Eurodollar came into existence with the acceptance of dollar
denominated deposits by commercial banks in Singapore, which was an ideal location for the
birth of the Asian currency market due to its excellent communication network, important
banks and a stable government.
Asian currency market developed when the Singapore branch of the bank of America proposed
that the monetary authority of Singapore relax taxes and restrictions.
International Banking
International banking has grown with the unprecedented expansion of economic activity since
the world war.
International banks perform many vital tasks to help the international transactions of multinational
companies. They finance foreign trade and foreign investment, underwrite international
bonds, borrow and lend in the Eurodollar market, organize syndicated loans, participate in
international cash management, solicit local currency deposits and loans and give information
and advice to clients.
732
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
Interbank clearing house systems: There are three key clearing house systems of interbank
fund transfers which transfer funds between banks through wire and facilitate international
trade.
a. The clearinghouse interbank payments system(CHIPS) This is used to move dollars
among New York offices of about 150 financial institutions that handle 95 percent of all
foreign exchange trades and almost all Eurodollar transactions.
b. The clearing house payments assistance system(CHPAS). This began its operations
in 1983 and provides services similar to those of CHIPS. It is used to move funds among
London offices of most financial institutions.
c. The Society for Worldwide Interbank Financial Telecommunications (SWIFT): It is
an interbank communication network which carries messages for financial transactions.
It represents a common denominator in the international payment system and
uses the latest communication technology. It has reduced multiplicity of formats used
by banks in different parts of the world. International payments can be made very
cheaply and efficiently.
Financing Foreign Trade
1. There are three major documents involved in foreign trade, namely, a draft, a bill of
lading and a letter of credit.
2. Documentation in foreign trade is supposed to assure that the exporter will receive the
payment and the importer will receive the merchandise. Many of these documents are
used to eliminate non completion risk, to reduce forex risk and finance trade transactions.
3. A draft or bill of exchange is an order written by an exporter that requires an importer
to pay a specified amount of money at a specified time. Through the draft, the exporter
may use its bank as the collection agent on accounts that the exporter finances.
4. A bill of lading is a shipping document issued to an exporting firm or its bank by a
common carrier which transports goods. It is simultaneously a receipt, contract and a
document of title. As a receipt, the bill of lading indicates that specified goods have
been received by the carrier. As a contract, it is evidence that the carrier is obliged to
deliver the goods to the importer in exchange for certain charges. As a document of
title, it establishes ownership of the goods. Bill of lading can be used to insure payment
before the goods are delivered.
5. Letter of credit is a document issues by a bank at the request of an importer. In this, the
bank agrees to honor a draft drawn on the importer if the draft accompanies specified
documents such as the bill of lading. The importer asks that his local bank write a letter
of credit. In exchange for the bank’s agreement to honor the demand for payment that
results from the import transactions, the importer promises to pay the bank the amount
of the transaction and a specified fee. A letter of credit is advantageous to both exporters
and importers because it facilitates foreign trade
733
10.4 International Financial Services and Insurance: Important
Issues and Features
This Section includes:
INTRODUCTION :
The term financial services refers to services provided by the finance industry. The finance
industry encompasses a broad range of organizations that deal with the management of money.
Among these organizations are commercial banks, investment banks, asset management companies,
credit card companies, insurance companies, consumer finance companies, stock brokerages,
and investment funds.
IMPLICATIONS OF A LARGE, RAPIDLY GROWING HOME MARKET FOR INTERNATIONAL
FINANCIAL SERVICES (IFS) IN INDIA :
A little appreciated aspect of India’s impressive growth from 1992 onwards is that it has resulted
in even faster integration of India with the global economy and financial system. There
has been a rapid escalation of two-way flows of trade and investment. Since 1992, India has
globalised more rapidly than it has grown, with a distinct acceleration in globalisation after
2002. Capital flows have been shaped by:
(a) global investors in India (portfolio and direct); and
(b) Indian firms investing abroad (direct).
Indian investors - corporate, institutional and individual - have as yet been prevented from
making portfolio investments abroad on any significant scale by the system of capital controls.
By the same token, Indian firms have borrowed substantially abroad. But foreign firms and
individuals have yet to borrow from India. Capital controls still preclude that possibility.
Implications of a large, rapidly growing home market for International Financial
Services (IFS) in India:
What drives the demand for IFS?
The impact of globalization on IFS demand and on IFCs:
Projections for revenue potential of Mumbai as an IFC
Insurance
Integration and Globalization of Financial Services:
734
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
Despite the controls that remain, those substantially increased two-way flows, reflect an increase
in demand-supply for IFS related to trade/ investment transactions in India. Put another
way, there has been an increase in IFS consumption by Indian customers and by global
customers in India. Demand for IFS from both has been growing exponentially. Cumulative
two-way flows in 1992-2005 were a multiple of such flows in 1947-92. The degree of
‘globalisation-integration’ that has occurred in the last 15 years, since reforms began in earnest,
is much larger than in the 55 years between independence and India embarking on ‘serious’
reforms. We have made up for six lost decades of economic interaction with the world in
a decade and a half. Still, what has happened over the last 15 years is a small harbinger of what
is to follow over the next twenty: particularly if the current growth rate of 8% per annum is
accelerated to 9-10% as is evocatively being suggested, and if India continues to open up the
economy on both trade and capital flows.
The typical discussion about an Indian International Financial Services Centre (IFC) exporting
IFS (especially made by those arguing for locating such an IFC in a SEZ) has been analogous to
that for software exports: i.e., a sterile relationship between Indian producers and foreign customers
of ‘support services’. However, in the case of IFS, India is itself a large, fast growing
customer of IFS. Conservative estimates of IFS consumption in India just a few years out, amount
to $48 billion a year. That is more than the output of many Indian industries today.
WHAT DRIVES THE DEMAND FOR IFS?
An understanding of what drives rapidly the growing demand for IFS in India needs to take
into account two features:
1. IFS demand is driven by increases in gross two-way financial flows that have occurred
in transactions with the rest of the world. It is not driven by net flows. Demand for IFS
by Indian customers - as well as foreign firms trading with and investing in India - is
driven by imports and exports. India-related purchases of IFS are related to inbound
and outbound FDI/FPI.
2. The annual growth of gross flows has accelerated dramatically in recent years. India’s
external linkages have been transformed since 1991-92. But that transformation has
been more radical since 2002. The Indian economy is now exhibiting signs of a’takeoff’
both in growth and even more rapidly in its globalisation (or integration with the world
economy). Hong Kong and China
Hong Kong evolved as an enclave IFC to provide IFS for traders dealing with a closed China.
In the 1970s and 1980s, Hong Kong had superior institutions, and provided IFS to North Asia
(China, Taiwan and Korea) as well as part of ASEAN (the Philippines and Vietnam which are
closer to Hong Kong than to Singapore). But, as a colonial artifice, Hong Kong’s role as an IFC
was compromised, if not damaged, as China opened up and connected itself to the world
through Shanghai and Beijing.
735
Since the 1980s, China has not required its economic partners to deal with it exclusively through
Hong Kong. With the gradual rise of Shanghai as an IFC, Hong Kong’s role as an IFC serving
China is diminishing, although it is unlikely to be completely eclipsed. At the same time ASEAN
regional finance has gravitated decisively toward Singapore.
THE IMPACT OF GLOBALIZATION ON IFS DEMAND AND ON IFCS :
When the economy of a country or region (e.g., the EU or ASEAN) engages with the world
through its current and capital accounts, a plethora of IFS are purchased as part-and-parcel of
these cross-border transactions. The hinterland effect of a rapidly growing national or regional
economy has been a crucial driver of growth in IFCs.
The 21st century has yet to unfold. But the emergence of China and India as global economic
powers is likely (as in the US, EU and ASEAN) to provide the same raison d’etre for these two
economies evolving their own IFCs to interface with those that serve other regions. History
suggests that no country or regional economy can become globally significant without having
an IFC of its own. But the emergence of IFCs has not always been a tale of growth potential and
start-up followed by prolonged competitive success in exporting IFS to global markets.
The trajectories of IFCs can wax and wane depending on how world events unfold. Growth in
Indian IFS demand is driven by the progressive, inexorable integration of the Indian economy
with the world economy. As such integration deepens and it triggers a variety of needs for IFS.
For example:
1. Current account flows involve payments services, credit and currency risk management.
2. Inbound and outbound FDI (as well as FPI like private equity and venture capital)
involves a range of financial services including investment banking, due diligence by
lawyers and accountants, risk management, etc.
3. Issuance of securities outside the country involves fees being paid by Indian firms to
investment bankers in IFCs around the world.
The stock of cross-border exposure (resulting from accumulation of annual flows)
requires risk management services to cover country risk, currency risk, etc. This
applies in both directions: foreign investors require IFS to protect the market value of
their exposure in India while Indian investors require the same services to protect the
market value of their exposure outside the country.
4. The shift to import-price-parity (owing to trade reforms) implies that Indian firms that
do not import or export are nevertheless exposed to global commodity price and currency
fluctuations. These firms require risk management services.
5. Many foreign firms are involved in complex infrastructure projects in India. Indian
firms are involved in infrastructure projects abroad. These situations involve complex
736
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
IFS. The same applies to structuring and financing privatizations (especially those involving
equity sales to foreign investors) and public-private partnerships which are
becoming a growing feature in infrastructure development around the world.
6. The growth of the transport industry (shipping, roads, rail, aviation, etc) involves financing
arrangements for fixed assets at terminals (ports, etc.) as well as for mobile
capital assets with a long life: i.e., ships, planes, bus and auto fleets, taxis, etc. That is
done by specialised firms engaged in ‘fleet financing’. India is now one of the world’s
biggest customers of aircraft buying roughly 40% of the world’s new output of planes
in 2006. This requires buying 40% of the world’s aircraft financing services.
7. Indian individuals and firms control a growing amount of globally dispersed assets.
They require a range of IFS for wealth management and asset management.
Outbound FDI by Indian firms in joint ventures and subsidiaries abroad has increased since
2004-05 as they have globalised. Foreign investments by Indian firms began with the establishment
of organic presence, and acquisitions of companies, in the US and EU in the IT-related
services sectors. Now they encompass pharmaceuticals, petroleum, automobile components,
tea and steel. And, geographically, Indian firms are spreading well beyond the US and EU by
establishing a direct presence or acquiring companies in China, ASEAN, Central Asia, Africa
and the Middle East. Such outward investments are funded through: draw-down of foreign
currency balances held in India, capitalization of future export revenue streams, balances held
in EEFC accounts, and share swaps.
Outward investments are also financed through funds raised abroad: e.g., ECBs, FCCBs and
ADRs/GDRs. Leveraged buy-outs related to these investments and executed through SPVs
abroad are not captured in the overseas investment transactions data. The Tata Steel-Corus
transaction, for example, involved substantial IFS revenues going to financial firms in Singapore
and London.
When two firms across the globe agree to undertake current or capital account buy-sell transactions,
the associated IFS are usually bought by the firm with better access to high quality,
low cost IFS. Consider the example of an Indian firm exporting complex engineering goods to
a firm in Germany. It can contract and invoice in: INR, USD or EUR. Because India has limited
IFS capabilities, and a stunted currency trading market, the transaction is likely to be contracted
in INR or USD. But the German importer generates revenues in EUR. It has to buy INR
or USD to pay the Indian firm. It may have to use a currency derivative (future, forward or
option) to cover the risk of a movement in the exchange rate of the INR or USD vs. the EUR
between placing the order and receiving the goods. This would typically be done in London.
However, if India had a proper currency spot and derivatives market, the Indian exporter
would be able to invoice in EUR. Local IFS demand would be generated by this local firm
converting locked-in future EUR revenues into current INR revenues at a known exchange
rate. Indian exporters are not as flexible as they wish to be in their choice of the INR or of global
currencies for invoicing (i.e., USD, JPY, EUR or GBP) - or even the choice of currencies such as
737
the SGD or CNY for trade with ASEAN and China. If they were, that could influence the
effective price received by them. When goods are sold by an Indian exporter, and a German
importer pays IFS charges in London for converting EUR into INR and managing the exchange
risk, the net price received by the Indian exporter is lower. When the Indian exporter sells in
EUR, and local IFS are purchased for conversion of EUR receipts into INR, the price received
would be higher.
These differences are invisible in standard BoP data, which do not separate out and recognise
charges for IFS being purchased or sold as part and parcel of contractual structures on the
current or the capital account. For this reason, the standard BoP data grossly understate the
size and importance of the global IFS market. Focusing on the transactional aspects of trade
flows would tend to understate IFS demand since this tends to ignore the risk management
business which rides on trade flows.
PROJECTIONS FOR REVENUE POTENTIAL OF MUMBAI AS AN IFC :
The median (base case) projections involve IFS demand in India rising from $13 billion in 2006
to $ 48 billion in 2015. A low-case assumption would see IFS consumption rising from US$ 6.6
to nearly US$ 24 billion over the same period. A more optimistic (but not implausible) ‘highcase’
assumption would see it grow from US$ 19.7 to nearly US$ 72 billion.
INSURANCE :
Finance and insurance have much in common. Each provides its customers with tools for managing
risks. The valuation techniques in both finance and insurance are formally same: The
fair value of a security and an insurance policy is the discounted expected value of the future
cash flows they provide to their owners. The definition of risk is the same: The variation of
future results (cash flows) from expected values. Finally, the management of insurable and
financial risks rely on the same two fundamental concepts: risk pooling and risk transfer.
Since the early 1990’s, we have seen substantial convergence between finance and insurance.
A shortage of property and liability insurance in the 1980s forced many corporate insurance
customers to consider alternatives to traditional insurance, such as selfinsurance, captive insurers,
and contingent borrowing arrangements to finance losses. Investment bankers and insurance
brokers provided many of these alternatives. The demand for catastrophe insurance
in the 1990s led to the development of options and futures for this type of insurance. Investment
banks, sometimes with insurance company or insurance broker partners, formed subsidiaries
to offer catastrophe and other high-demand coverage through new financing arrangements.
Life insurers have developed products with embedded options on stock portfolios. Insurers
have begun to use structured securities, such as bonds with indexed coupons, in their investment
portfolios.
Thus, in the 1990s, financial markets offered products for managing risks traditionally handled
by insurers. The high demand for catastrophe insurance on property started the movement.
738
COISnTte-VrOnaLtUiMonE-aPlR MOFoInTe AtaNrAyL FYuSInSd and Financial System
We now see convergence in the investment markets as well as in various new alliances, partnerships
and joint ventures.
INTEGRATION AND GLOBALIZATION OF FINANCIAL SERVICES :
Changing customer needs, more knowledgeable and demanding customers, new technology,
liberalization, deregulation, and a combination of other forces are blurring the lines between
financial products, institutions, sectors, and countries. Regulators are responding to market
pressures by allowing more inter-sectoral competition. Banks, securities firms, insurance companies,
and other financial intermediaries increasingly compete with each other by offering
similar products and services and by entry into fields previously reserved for one sector only.
Financial services integration occurs when financial products and services traditionally associated
with one class of financial intermediaries and distributed by another class of financial
intermediaries.
Financial services convergence is the tendency of financial products and services traditionally
one sector to take on characteristics traditionally observed with financial products and services
of another financial services sector.
Convergence occurs through customer demand across traditional sector lines. Examples include
the introduction by insurance companies of variable (unit linked) life and annuity products
that contain both insurance and securities features. Another burgeoning area is the banking
industry’s creation of securitized mortgage and corporate debt portfolios, which involves
packaging a group of mortgages or other loans into marketable securities that are sold to investors.
As banks, securities firms, and insurers construct products and offer services that resemble the
features of their competitors, product convergence will be an important driving force toward
financial services integration.
This integration gave birth to financial services conglomerates. A Financial services conglomerate
is a firm or group of firms under common control which offers financial services that
extend beyond the traditional boundaries of any one sector. The two most commonly discussed
arrangements are bancassurance and universal banks.
Bancassurance describes arrangements between banks and insurers for the sale of insurance
through banks, wherein insurers are primarily responsible for production and banks are primarily
responsible for distribution.
Universal banks are financial intermediaries that typically offer commercial and investment
banking services, and also insurance.
Comments (0)
Post a Comment